Yeni mesajlar Yeni konular En çok cevaplanan En görüntülenen konu En çok begenilen

En çok mesaj
Kullanıcı
Mesaj

☆☆E2 EMU CCAM☆☆ NCam sürümleri[*NCam]

Bacanak_46

Süper Moderatör
Katılım
2 Mar 2017
Mesajlar
23,024
Beğeniler
969
Puanları
262
Yaş
38
Konum
bursa
#1


NCAM 6.3


Ncam V 6.3-Add PowerVu hash mode 17 and 18

**************************************
NCAM 6.3für DM900UHD, DM920DM520,DM525, DM820, DM7080 (DEB)

OOZOON, DREAM ELITE, NEWNIGMA2, GEMINI, Merlin4

NCAM 6.3 für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…
 

Bacanak_46

Süper Moderatör
Katılım
2 Mar 2017
Mesajlar
23,024
Beğeniler
969
Puanları
262
Yaş
38
Konum
bursa
#2
Ncam 6.4 compiled and patched by marouan & READ

-Fix ecm unmasking issue
-Fix for tiers with rights set to 0x49xx
-Revert To [nagra] T1 Resync command error, trying to reactivate!

DOWNLOAD

File Type: zip ncam.mips.zip (742.0 KB, https://www.sendspace.com/file/398jbg
File Type: zip ncam.cortexa9hf-vfp-neon.zip (682.1 KB, https://www.sendspace.com/file/zq1ypf
File Type: zip ncam.sh4.zip (735.0 KB, https://www.sendspace.com/file/g91uk5
File Type: zip Ncam-Images-MIPS-IPK.zip (1.78 MB, https://www.sendspace.com/file/nejrpd
File Type: zip NCam-Images-OSDreambox-DEB.zip (1.24 MB,https://www.sendspace.com/file/loebbg
 

mehmetkarahanlı

Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
36,143
Beğeniler
970
Puanları
262
#3
Ncam-6.4-compiled-and-patched-by-marouan-READ-21.10.2018.rar.html
Ncam 6.4 compiled and patched by marouan & RAED - 21.10.2018 - sh4 - cortexa9hf-vfp-neon - mips - Images-MIPS-IPK - Images-OSDreambox-DEB **** What's New: -Fix ecm unmasking issue -Fix for tiers with rights set to 0x49xx -Revert To [nagra] T1 Resync command error, trying to reactivate!
21.10.2018 16:05
 

Bacanak_46

Süper Moderatör
Katılım
2 Mar 2017
Mesajlar
23,024
Beğeniler
969
Puanları
262
Yaş
38
Konum
bursa
#5
Ncam 6.7 compiled and patched by marouan & RAED

- ALL FILES 01.11.2018

-Don't allow BISS ecm requests with a length shorter than 3 (NCam sends a fake ecm request for BISS with a length of at least 5 anyway. Also make some small optimizations and cosmetic changes) -Remove redundant ecm length checks -Use the typedef struct types instead (cosmetic)

-Forbid parallel access to the key db and key file (This should fix the rare crash at NCam startup when two or more Emu readers are configured. If the issue remains, please report back!)

-Fix CW checksums



Ncam-6.7-compiled-and-patched-by-marouan-RAED-01.11.2018.rar.html
 

mehmetkarahanlı

Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
36,143
Beğeniler
970
Puanları
262
#6


[SOFTCAM] NCAM 6.6


Ncam V 6.6
-Improve ecm length check and add debug messages-Remove support fot the fake caid (0xFFFF)-Use built-in functions (plus new ones) for checking caid-Use 3des function built in ncam– List reader entitlements by caid-Cosmetic change to entitlement listing(All keys are now displayed with 8 digits under the reader’s entitlement list)-Configure the emu reader to not test the cw checksum for powervu-Display caids/idents by increasing order in reader settings-Don’t put a new line after writing keys in SoftCam.Key*****From Emu version 6.6 and on, in order PowerVu to work properly, you need to tell NCam to skip the checksum test for CWs.This can be done by one of the following three ways:1-Delete you current Emu reader and let OSCam-Emu create a new one for you, with all necessary settings.2-Add the 0E00:000000 string in the Skip CWs checksum test only for option under the general reader settings.3-Add the disablecrccws_only_for = 0E00:000000 directive in the oscam.server file under the Emu reader section.IMPORTANT: You have to do this change for every Emu reader you have configured for PowerVu

**************************************

NCAM 6.6für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)

OOZOON, DREAM ELITE, NEWNIGMA2, GEMINI, Merlin4



NCAM 6.6für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…


 

mehmetkarahanlı

Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
36,143
Beğeniler
970
Puanları
262
#7


[SOFTCAM] NCAM 6.7


Ncam V 6.6

  1. -Don’t allow BISS ecm requests with a length shorter than 3
  2. (NCam sends a fake ecm request for BISS with a length of at least 5 anyway. Also make some small optimizations and cosmetic changes)
  3. -Remove redundant ecm length checks
  4. -Use the typedef struct types instead (cosmetic)
  5. -Forbid parallel access to the key db and key file
  6. (This should fix the rare crash at NCam startup when two or more Emu readers are configured. If the issue remains, please report back!)
  7. -Fix CW checksums
**************************************
NCAM 6.7für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)

OOZOON, DREAM ELITE, NEWNIGMA2, GEMINI, Merlin4




NCAM 6.7für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…


 

mehmetkarahanlı

Co.Administratör
Katılım
19 Ağu 2015
Mesajlar
36,143
Beğeniler
970
Puanları
262
#8


[SOFTCAM] NCAM 6.8


Ncam V 6.8

**************************************

NCAM 6.8für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)

OOZOON, DREAM ELITE, NEWNIGMA2, GEMINI, Merlin4




NCAM 6.8für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…


 

Bacanak_46

Süper Moderatör
Katılım
2 Mar 2017
Mesajlar
23,024
Beğeniler
969
Puanları
262
Yaş
38
Konum
bursa
#10

SOFTCAM
[SOFTCAM] NCAM 7.0
November 15, 2018 dreambox 4k camd, emu, Ncam, ncam 7.0, Softcam
Ncam V 7.0
15-11-2018 -Add basic support for BISS 2 (This is just a small set of changes that allow BISS 2 ecm and emm detection. Nothing more at the moment!)

**************************************
NCAM 7.0
für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)



OOZOON, DREAM ELITE, NEWNIGMA2, GEMINI, Merlin4



NCAM 7.0
für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)


OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…

 

Bacanak_46

Süper Moderatör
Katılım
2 Mar 2017
Mesajlar
23,024
Beğeniler
969
Puanları
262
Yaş
38
Konum
bursa
#12



[SOFTCAM] NCAM 7.3


Ncam V 7.3

08-12-2018 -Added support for hash mode 25

**************************************


NCAM 7.3für DM900UHD, DM920, DM520,DM525, DM820, DM7080 (DEB)

OOZOON, DREAM ELITE, NEWNIGMA2, GEMINI, Merlin4New: DM500, DM800HD,DM800HD,DM7020




NCAM 7.3für vuplus zero 4k/ solo 4k/ultimo 4k/uno 4k, mutant hd51/52, AX 51/52, Xtrend ET11000/120000, Spycat 4K, Edision 4k, Octagon 4k​, DM900, DM92, Vu+ solo, Uno, Duo, Ultimo, Zero (IPK)

OpenATV, BlackHole, OpenBH, OpenLD, OpenPLi, OpenHDF, OpenVix, VTI, SatDreamGr, OpenDroid…


 
Yardım Kullanıcılar

Herhangi bir odaya katılmadınız.

    Herhangi bir odaya katılmadınız.
    Üst